Day 8 TD

 Day 8 I took the car out for a drive in the morning to make sure everything still worked fine. I noticed a gasoline leak on cylinder 4 so I needed to take the injection system off again… this resulted in 4 more hours of replacing rubber gaskets that are wrapped around the inside of the injectors, there was no visible damage to the ring that went bad, but I replaced it, and the problem was solved. Once the injectors were done for the third time I threw in the towel for the day and clocked in a total of 6 hours. 

Comments

Post a Comment

Popular posts from this blog

Week 1 TD

  Tyson D’Orio Senior Project  May 14, 2023 Week 1 of Senior project was very successful considering the amount of time I had put in. It didn’t take me long at all to get the car started up so I could test what was wrong. I was concerned about how productive I was going to be considering I didn’t have much packed on Monday. Things ended up taking a turn on Tuesday morning.  I had a friend go over to the house and pack my tools into the Jeep and coordinate a tow truck to bring it up. The towing company came Tuesday morning and picked the car up. They hauled it through Mass and up to Wilmot. When it arrived I had already spent Monday morning disassembling an intake manifold and an exhaust manifold. This helped me out big time. On Tuesday afternoon when I got back from practice, I began assembling the sensors on the new throttle body. After that, I got my injectors mounted inside the fuel rails and sealed them to the intake manifold. I spend some time that day putting together a list of w
Read more

Day 5 TD

 Day 5 was a drag since I didn’t have any new parts to put on the car. I worked for an hour or 2 checking for exhaust leaks and making sure those new gaskets were sealed up nice. Ended up braking my garage door so I needed to move my tools out of the garage so they didn’t get stolen. Called the garage guys and got a date on when they could come. Had lunch with Don McCarthy mid day to take off some weight. Got back to an hour of wiring work in the afternoon. Total of 4 hours of work on Friday. 
Read more

Day 6

 Day 6 I began shopping for piping in the morning to weld into the pre existing turbo kit, me and Chris drove down to Boston to pick up a y pipe that will split under the front pipe on the bottom of the car. We were out for about 3 hours on the morning then came home to pack up the rest of the turbo kit to bring up north. This was a total of 9 hours considering the drive time up and down from Boston and Andover.
Read more