Day 9 TD

 On day 9 I was trying to get my passenger door fixed. It is stuck on the handle side so the door won’t open from either handle. I unbolted the front side of the door (mirrors, and hinges) I began wrenching the door out hoping to break the clip that the door handles control. I ended up bending the side of the jeep and ruining the car more while trying to do this so I stopped after a few hours of finagling the door. This made me incredibly upset considering the car is more broken than what I started with. This took me about 6 hours to prep the door and try to get it back in place after destroying everything. 

Comments

Post a Comment

Popular posts from this blog

Week 1 TD

  Tyson D’Orio Senior Project  May 14, 2023 Week 1 of Senior project was very successful considering the amount of time I had put in. It didn’t take me long at all to get the car started up so I could test what was wrong. I was concerned about how productive I was going to be considering I didn’t have much packed on Monday. Things ended up taking a turn on Tuesday morning.  I had a friend go over to the house and pack my tools into the Jeep and coordinate a tow truck to bring it up. The towing company came Tuesday morning and picked the car up. They hauled it through Mass and up to Wilmot. When it arrived I had already spent Monday morning disassembling an intake manifold and an exhaust manifold. This helped me out big time. On Tuesday afternoon when I got back from practice, I began assembling the sensors on the new throttle body. After that, I got my injectors mounted inside the fuel rails and sealed them to the intake manifold. I spend some time that day putting togeth...
Read more

Day 6

 Day 6 I began shopping for piping in the morning to weld into the pre existing turbo kit, me and Chris drove down to Boston to pick up a y pipe that will split under the front pipe on the bottom of the car. We were out for about 3 hours on the morning then came home to pack up the rest of the turbo kit to bring up north. This was a total of 9 hours considering the drive time up and down from Boston and Andover.
Read more

Day 2 TD

 Day 2 was a big day for the operation. Jeep got hauled up to wilmot in the morning. I began unloading tools and parts out of the truck to get me ready to roll. Headed out to baseball practice shortly after the arrival of the jeep. When I got back I began assembling the sensors on the new throttle body (circular part with butterfly valve in the middle). After that I got my injectors mounted inside the fuel rails and sealed them to the intake manifold. Spend some time putting together a list of what I needed from Massachusetts and the hardware store. 
Read more